Startcopy.net
Кто виноват?
Canon iR1600/2000
Canon iR1600/2000
  1. Press the additional function key and the ID (#) key in sequence to start service mode.
  2. Using the cursor key, select 'TEST MODE'.
  3. Press '6' on the keypad to select '6: FACULTY TEST'.
  4. Press '3' on the keypad to start sensor check mode, indicated by the following screen:

  5. While the above screen is indicated, press '1', '2', '3', '4', and '5' on the keypad so that the Status screen of each respective sensor will appear; for instance, when '1' is pressed on the keypad,
  6. Move the flag of the sensor to see that the indication alternates between 'of' and 'on', i.e., OFF and ON.
    The following shows what will take place when '1' through '4' are pressed on the keypad, indicating the sensor name and the sensor status while machine is in standby:
Нажмите “1”

DS original set sensor* (PI6); on/original present, of/original absent
DES reader sensor* (PI8); on/original present, of/original absent
DOC original width sensor* (PI4, PI5); indicates original width based on ON/OFF combinations of 2 sensors
CRG developing assembly sensor; on/of developing assembly present/absent
DCVS door switch (DORSW1, DORSW2); on/paper not detected (in standby, front cover or left cover closed), of/paper detected (in standby, front cover or left cover open)
*State of sensors in the ADF.
Нажмите “2”

HPS CS sensor HP sensor (PS113; on/CS unit in home position, of/CS unit not in home position)
BCVS copyboard cover open/closed sensor (PS111, 112); on/cover open, of/cover closed
NDFS length sensor 3* (PI3); on/original present, of/original absent
DLS0 length sensor 2* (PI2); on/original present, of/original absent
DLS1 length sensor 1* (PI1); on/original present, of/original absent
*State of sensors in the ADF.
Нажмите “3”

CT1 cassette paper sensor (PS151); on/paper present, of/paper absent cassette paper size detecting switch (SW105); indicates paper size
CT2* 1st cassette unit paper sensor (PS151); on/paper present, of/paper absent 1st cassette unit paper size detecting switch (SW105); indicates paper size CT3: 2nd cassette unit paper sensor (PS151); on/paper present, of/paper absent 2nd cassette unit paper size detecting switch (SW105); indicates paper size
CT4 3rd cassette unit paper size (PS151); on/paper present, of/paper absent 3rd cassette unit paper size detecting switch (SW105); indicates paper size
*If 2-cassette standard type, indication the 2nd cassette.
Нажмите “4”

MLT multifeeder paper sensor (PS105); on/paper present, of/paper absent A4/indicates selected paper size
TN toner sensor; on/toner present, of/toner absent
JAM jam detection; on/jam detected, of/jam not detected

Нажмите “5”

BSCT copyboard cover open/closed sensor (PS113); on/cover open, of/cover closed
BDOC original size; indicates paper size based on combinations of original size sensor states
BDSS original size sensors (PS117, PS116, PS115, PS114); on/original present, of/original absent

Расположение датчиков:

PS101 Registration paper sensor
PS102 Paper full sensor
PS103 Delivery sensor
PS105 multifeeder paper sensor
PS111 Copyboard cover open/closed sensor
PS112 ADF open/closed sensor
PS113 CS unit HP sensor
PS114 Original size sensor 1
PS115 Original size sensor 2
PS116 Original size sensor 3
PS117 Original size sensor 4
PS120 Waste toner case full sensor
PS151 Cassette paper sensor
PS152 Retry sensor

Статья размещена 5 апреля 2007 года

 
Рейтинг@Mail.ru
Перепечатка без разрешения запрещена.
2007-2013